My uds build

Discussion in 'UDS Builds' started by c farmer, Jun 3, 2013.

  1. c farmer

    c farmer Smoking Guru Staff Member Moderator OTBS Member SMF Premier Member

    Mine wont look that good.
     
  2. I wanna see some beef!
     
  3. c farmer

    c farmer Smoking Guru Staff Member Moderator OTBS Member SMF Premier Member

    How would laying foil in the bottom work, instead of a pan to catch the drippings and ash.
     
  4. I think It would be hard to get back out[​IMG].
     
  5. c farmer

    c farmer Smoking Guru Staff Member Moderator OTBS Member SMF Premier Member

    How do you get a pan out without tearing all the hardware out of it?
     
  6. I don't under stand the question. What pan? are you talking about putting a pan in the bottom to catch the ash?
     
  7. fwismoker

    fwismoker Master of the Pit

    That ash pan I have at the bottom I showed you is about 19 inches... I just grab it and pull it up at a slight angle.  It doesn't spill

    I love that thing,  it catches every drip of juices along with ash. 
     
  8. c farmer

    c farmer Smoking Guru Staff Member Moderator OTBS Member SMF Premier Member

    Yup a ash pan.
     
  9. fwismoker

    fwismoker Master of the Pit

    Do what I told you and bend the edges way up to form the side of the pan.... Put a hook to grab it and your good to go.   I'll grab mine with the hook and pull it up by hand... Simple
     
  10. fwismoker

    fwismoker Master of the Pit

    Use big channel locks or pliers to bend it up
     
  11. c farmer

    c farmer Smoking Guru Staff Member Moderator OTBS Member SMF Premier Member

    [​IMG]
     
  12. I have been thinking about attaching a ash pan to the bottom of my basket.
     
  13. c farmer

    c farmer Smoking Guru Staff Member Moderator OTBS Member SMF Premier Member

    You don't have a ash pan now?
     
  14. fwismoker

    fwismoker Master of the Pit

    David  I'll find or take a pic of mine and send it to you... It's the simplest thing in the world and it's basically free.  It catches everything because it covers 95%of the bottom. 
     
  15. fwismoker

    fwismoker Master of the Pit

    I didn't or wouldn't want one on my basket for a couple of reasons. 

    1) you don't need to empty it often

    2) I wanted something easy to take out that covers the whole bottom
     
  16. Yes ash pan now. A couple of tack welds and it would be attached.
     
  17. cool send a pic. It might be better than the one I made out of a barrel top.

    Remember I'm poor folk! I have to build my own stuff.
     
  18. fwismoker

    fwismoker Master of the Pit

    did you get it? I PM'd it to you.
     
  19. fwismoker

    fwismoker Master of the Pit

    [​IMG][​IMG]

    Sent from my SPH-M830 using Tapatalk 2
     
  20. Got it. thanks
     

Share This Page