my new to me GOSM 3605G

Discussion in 'Roll Call' started by ron83, May 16, 2016.

  1. ron83

    ron83 Newbie

    Hello all,

    Just picked up a used old model GOSM 3605g and this looks like the place to find info on smoking me some meat!!!!

    Have played around with one of the older brinkmann bullet ones but always a pain to load everything from top so found this one and hopefully will be alot easier.
     
  2. gearjammer

    gearjammer Master of the Pit

    Hello and welcome Ron, you'll find plenty of folks on here 

    that will be happy to help get you started in the right direction.

    Glad you found this place.

                Ed
     
  3. one eyed jack

    one eyed jack Master of the Pit

    Welcome aboard Ron.  Best luck with your new to you smoker.  Let us know how things go with it.
     
  4. smokinal

    smokinal Smoking Guru Staff Member Moderator OTBS Member ★ Lifetime Premier ★

    Congrats on the new smoker Ron.

    Welcome to the forum!

    Al
     
  5. ron83

    ron83 Newbie

    Thanks all,

    Gonna do a few mods I have found here and hopefully smoking by the weekend.
     
  6. dirtsailor2003

    dirtsailor2003 Smoking Guru OTBS Member

    Welcome! My GOSM is going strong and it's 10 years old. Best mod you can make is to add a needle valve. It will allow you far better control of the temps.

    Here's one that will work:


    Then buy yourself one of these from Todd at AmazeN Smokers. The tubes work great in the propane smokers as long as your pit temp is below 285°. http://www.amazenproducts.com/

     

Share This Page