My CG grease catcher mod

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

backyardsmokin

Meat Mopper
Original poster
Jun 2, 2011
233
14
Castle Rock, CO
I always try to place a pan under my food it is not always possible and that idea of the small veggie tin can is not enough on long smokes.  I found this out when I did 2 butts and had to switch out the can 4 times.

With that in the past, I decides to come up with a way to have the grease go into a larger container and below is my working idea ( sorry for the bad camera shot).

9fe0e2ff_DSC_0057.jpg


I used a  funnel from Target and chopped the top 3/4 inch off of it, and a piece of 5/8 inch tubing that I got at Lowes to pour into a coffee can.  I also found that the fullen is a perfect lenght to pour into a milk carton w/o the tubing.

All in all it was less that $2 for everything to make this work.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky