More brewing updates

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

coyote-1

Smoking Fanatic
Original poster
Sep 14, 2008
554
15
First batch (Altbier) has 9 bottles left. I want to keep them around for awhile. Which means I have to buy beer! Not a bad thing
icon_cool.gif


I've been purchasing (and consuming) minikegs. Most recent is Grolsh. I rigged up a portable CO2 system (as per the instructions on the Northernbrewer forum), and it works well. I also managed to allocate door space in the kitchen fridge so I don't always have to go into the basement for a beer. So on Saturday I racked three minikegs (plus 8 bottles) of the red ale I brewed on President's Day, and yesterday I brewed a Canadian ale. I have one empty minikeg, and the Grolsh mini is almost empty. So I just have to buy and consume one more mini in the next week; somehow I doubt I'll have any trouble managing that
PDT_Armataz_01_36.gif


Yesterday morning, before I brewed, I made a wort chiller. These things are sold for $60 or more. My total parts cost was less than $25. I cleaned the chiller, and then put it in the boiling pot for the last 10 minutes of the boil. I packed the sink with snow, put the brewpot in, hooked up the chiller.... I also had a quart of frozen sauce that needed defrosting, so I sterilized the outside of the container and put it into the brewpot. Between those three things, 2.5 gallons of boiling wort came down to 80 degrees in 20 minutes!

So the methods are falling into place. Which is good, as I need to be able to supply myself @ two cases of beer per week come summertime. The minikegs will travel well to the beach with the portable CO2. Next task: Paintball-based, regulated CO2 for the fridge door. I'm gonna build a panel that will look like it's part of the fridge, with a good tap.

Brewing is turning out to be a great co-hobby with smoking
icon_smile.gif
 
brewing was my first hobby and it is the greatest hobby ever.but i was thinking abought what you were saying abought the paintball-based kegeraitor.i may be wrong but i beleave thay mix a lubricant/oil in with the co2 to keep the O rings from drying out and cracking.now what you can do is go to a welding supply shop and buy a 5lb tank of co2 which is purer than medical grade co2.
 
Thanks for the advice! I already was aware of that possibility; the idea is to get 16oz CO2 tanks (empty) from a paintball supplier, and then refill at a local gas supplier. Because the smallest 'standard' CO2 tank will not come close to fitting where it needs to go - which is on the door of my main fridge.
 
Brewed an Irish stout ale last night. Next week I'm gonna transfer it to a secondary fermenter, and then brew a pale ale.

After five batches where nothing went as expected yet every batch has been delicious, I've learned to simply trust the hydrometer. So the process has boiled town to this:

give the beer a week in primary
measure SG, transfer to secondary
measure FG in another week
bottle/minikeg the beer
age three weeks

That said, come autumn and winter I'm gonna try to push the aging process. The beers are drinkable and quite good at three weeks, but two months makes them excellent.

I was in Philly last weekend. A restaurant called FORK is doing a batch for the upcoming BeerWeek. They started just three days ago.... unfortuately, their beer will be nowhere near drinkable for the second week of June.
 
I don't even use a hydrometer anymore.

For ales, a week in the primary, week in the secondary, then the beer gets kegged w/ 1/2c DME.

For lagers, two weeks in the primary, three in the secondary, then keg w/ 1/3c DME and lagered for 6-8 weeks.

You can easily guess the alcohol content by the amount of grain you use in the mash or by the 'grin factor' of the first couple beers.
 
Minikegged/bottled a batch tyesterday, and will minikeg/bottle another on Wednesday - as I brew yet another batch. Then I'll brew again on Sunday while I move Wednesday's abtch from primary to secondary.

Production is finally catching up to consumption  :) 
 
Wait until you get more advanced and start doing all grain batches, you can make smoked beers by smoking your grains before mashing.  I am going to experiment with a few different smoked beers this summer to have a selection of nice smokey beers for fall and winter.

Coyote-1, I have brewed all grain batches from grain and force carbonated them in kegs and drank the beer within 10 days.  It is true aging will mellow out some beers, and some are better that way, but simple recipes like Hefes, Pale ales, and amber ales are all easily drinkable in 3 weeks.  In fact, hefe is ment to be served fresh.  Give it a try some time and let me know what you think.
 
Not doing all-grain yet, but I'm now doing my own "grain flavoring" blends. I'm hoping that by this time next year, I'll be doing all-grain.

But my production is finally where it should be. I've brewed on each of the past three weekends, and I'll brew again the weekend after Thanksgiving... and then again two weeks after that. I have 18 minikegs, and I expect them all to be full by Xmas. From there I'll only have to brew once a month or so in order to maintain full stock into summer.
 
Wait until you get more advanced and start doing all grain batches, you can make smoked beers by smoking your grains before mashing.  I am going to experiment with a few different smoked beers this summer to have a selection of nice smokey beers for fall and winter.

Coyote-1, I have brewed all grain batches from grain and force carbonated them in kegs and drank the beer within 10 days.  It is true aging will mellow out some beers, and some are better that way, but simple recipes like Hefes, Pale ales, and amber ales are all easily drinkable in 3 weeks.  In fact, hefe is ment to be served fresh.  Give it a try some time and let me know what you think.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky