MES Generation Number Recognition Pictures & Info (Digital Units)

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
 
Hey Bear,

I forgot to ask you about the pellets I need to order.  As I understand it, you're only supposed to generate smoke for half of the cooking time????  That being said, if I smoke a Boston Butt for 8 hours, I would need enough pellets to last 4 hours.  How many pounds would I need to do that?  I guess that as a rule of thumb a pound of pellets lasts how long?  I'm trying to figure out how much to buy along with the maze.

Backpacker
Yup---Yours is a Generation #2.

The best thing seems to be to do the following:

Remove the little water pan from that slanted drip plate.

Then set your AMNPS over that hole left by the missing water pan (you don't need the water pan anyway---Ever).

Then you can put a throw-away foil pan under the water pan hole in case any drips show up.

I make smoke as long as the meat is in the smoker, unless the food is in the foiling stage.

Get plenty of Pellets & some Dust. The more you get the less shipping you pay per pound. IMO

Bear
 
Hi Bear - great info as always!

Now a side question: On this thread and your "Boston Butt Pulled Pork (Step by Step)" thread I have noticed that your pics in the initial post of the thread do not show up for me, but all other pics in the thread seem to (I can see backpacker's pic in this thread).  Any thoughts?
 
 
Hi Bear - great info as always!

Now a side question: On this thread and your "Boston Butt Pulled Pork (Step by Step)" thread I have noticed that your pics in the initial post of the thread do not show up for me, but all other pics in the thread seem to (I can see backpacker's pic in this thread).  Any thoughts?
Hi Frankly!!

Sorry to hear that----I think maybe you're just too far on the other side of Allentown for those Pics to reach you!!

Just Kidding.

I've had that happen already when I tried to open pics. Sometimes I just refresh the screen & they come up, and sometime I just wait a little longer, and they come up. Sometimes it takes awhile if there are a lot of Pics on one Post. Backpacker only has two small pics on this page.

Do you have trouble with anybody else's pics?

I think "Backpacker" uploaded his pics directly through the forum, and I ran mine through Photobucket, and then Copied & Pasted them.

Maybe your system needs something to be able to use Photobucket.

These are just guesses, because I'm pretty much of a Computer Dummy.

Let me know how you make out.

Bear
 
Hi Bear - must be this particular locked down work laptop and the Photobucket use...  Everyone else's pics come up fine and I am able to see yours on another laptop and phone now that I tried that!  Now back to looking at threads and figuring out what to smoke this weekend!
 
 
Hi Bear - must be this particular locked down work laptop and the Photobucket use...  Everyone else's pics come up fine and I am able to see yours on another laptop and phone now that I tried that!  Now back to looking at threads and figuring out what to smoke this weekend!
OK---I thought that might be.

I got a Retired Buddy who is a guard at a big Nursing Home, and there are things that he can't open on the work computer.

Bear
 
Bear carver
Where would you put a 5 X 8 AMNPS on a 40" Gen. 2.5? lower left?
I have found the best place in my Gen #2.5 to be:

I put the bottom rack in, and put the AMNPS on the right side of that bottom rack.

Then if it's not smoking too good, I give it more air by pulling the chip dumper out a couple inches.

If it gets to smoking too heavy, I push the chip dumper back in.

Bear
 
 
Can anyone tell me what model this MES is, I can't place it.  I'm thinking that it's a Gen #2 only they reconfigured the exhaust to be on top instead of on the side.

https://scranton.craigslist.org/grd/d/40-cubic-inch-electric-smoker/6259731820.html

Is it worth the price? 

Is it a good model to have?

Or should I just spend the $329 at Sam's for the 2.5 model?

Chad
Looks like a Gen #2. (Late model)

The only bad model Masterbuilt makes.

Not worth $250.

I would pay the $329 for the Gen #2.5, or wait for one of it's $289 sales.

Bear
 
Last edited:
 
Looks like a Gen #2. (Late model)

The only bad model Masterbuilt makes.

Not worth $250.

I would pay the $329 for the Gen #2.5, or wait for one of it's $289 sales.

Bear
Thank you very much Bear.  That's quite unfortunate.  My mouth was beginning to water as I was thinking about some prime rib this weekend.

Even the model #2's that they're still making are bad?  Like I said, I can see that they moved the vent to the top left and made that change from the one you tested.  He says that he bought it about a month ago so it's brand new.

Chad
 
Last edited:
 
Thank you very much Bear.  That's quite unfortunate.  My mouth was beginning to water as I was thinking about some prime rib this weekend.

Even the model #2's that they're still making are bad?  Like I said, I can see that they moved the vent to the top left and made that change from the one you tested.  He says that he bought it about a month ago so it's brand new.

Chad
It's a little better, since they moved the top vent from the side to the top, but as long as that full width slanted drip pan is in there, I wouldn't want it.

The slanted drip pan can be removed, and the bottom rack can be put in place with a full size water pan or a Foil pan on that bottom rack, but that's just my theory. I haven't actually tried it.

Bear
 
Again, thank you for your expertise Bear, it's always appreciated.  I think that I'll take your advice and wait to get the 2.5

Chad
 
Sorry about that guys. Nearly all of my Pics went away during the platform switch.
Photobucket is the culprit.
I'm working on it, so give me a few days & I'll get all the ones on my Step by Steps restored.
Bear with The Bear.

Bear
 
OK Guys!!
Since you're nice guys, I got on it right away & fixed it up.
The Pics are there now!!

Bear
 
Nice job John.
Unless it dies I can't see replacing my MES 30 GEN 1. But........after seeing that sunshade on the new model I have to admit to a wee bit of envy. I want one---just the sunshade. LOL
Gary

Ha-Ha Gary!!
Actually that Sunshade is nice, although not important.
The reason I pointed that out is when looking at the Gen #2.5 and the Newer Made Gen #2 from the outside, that shade is the easiest way to tell them apart. Also---I don't think the Gen #2 has the slots to accept the Sunshade.

Bear
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky