MES 20070910 briquet in chip tray

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

thejester

Newbie
Original poster
Oct 28, 2010
9
10
Does anyone see a problem with putting a lit briquet in the chip tray to assure the wood chips smoke?  I suspect I could also add a briquet through the side loader too, with chips, everytime I load chips.  Happy to have someone point out the flaw in my plan.
 
I haven't had any thing over smoked but i have wanted to try using a briq or two for the flavor.seems like there was a thread on that recently.try it out and let us know how it worked
 
yeah, you can put a briquette in the chip tray.  It will leave a smoke ring on the meat but it won't really change the flavor.  My MES smoked fine so it didn't really change how much smoke came from the chips.  I used to start with 3 briquettes in the chip tray then add one every 1.5 hours to get a smoke ring.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky