Massive reverse smoker build. Check it out let me know what you think

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
Took me about a month to complete except for the fenders and the 3 burner those go on tomorrow to finish. Bolt ons... Ive had a while off work now so figured id build it much better. Its a. 500 gallon tank wit a extention. 2 sections and a warmer/secondary smoker. Firebox is 30x30 square. With a rack log basket just above my inlet that is 14x5 inches. Reverse flow with 1/4 plate and angle to grease/water dump. Big side is 3 racks that are 57 inches wide and 40 inchs deep. Smaller side fits 60 full racks ot once and is 27 inches wide and 40 inches deep. Secondary/warmer has a slider to let smoke in or keep out and also control hpw much smoke can enter. That is 4 foot tall and 2 foot deep. 2 foot wide with 6 racks so i can heat up 12 full hotel pans or smoke off more stuff. Stainless 5 foot table for prep and a 3 top burner for odds and ends. Plus dula propane tank storage.
 
Keeps temps 3 degrees from firebox side to small side and warmer box reads 5 degrees colder than firebox side
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky