Looking at building a smoker as a project for me and my son to do

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

the1wildfire

Newbie
Original poster
Oct 10, 2016
2
10
I have an old water tank 48"X16" and seems to be about 1/8" thick, with a couple pieces of steel that are a bit thicker one is 51"X14" wide and one 72"X16.5" also have a bunch of strips that are 6" wide and 6' long. Would it be best to weld the 6" pices right on the other to make it thicker or put a space between them to have a gap?
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky