lang 60

Discussion in 'Wood Smokers' started by bbq ron, Nov 10, 2009.

  1. bbq ron

    bbq ron Smoke Blower

    when i power wash my lang, i get a lot of water in the fire box through the oven vents. what is an easy way to get it out if there is one.
  2. warthog

    warthog Smoking Fanatic

    Others have stated that they have a few holes in the bottom of their fireboxes. If that is the case you may want to drill a drain hole or two.
  3. billbo

    billbo Master of the Pit OTBS Member

    You could also shop vac it out.
  4. mballi3011

    mballi3011 Smoking Guru OTBS Member SMF Premier Member

    The vaccum sounds pretty easy but if you want drill a hole about 1 1/2" and put in a pet **** and then you can just drain it as you want to. You know the big brass fitting with a handle.
  5. randya

    randya Meat Mopper SMF Premier Member

    You can get them at Harbor Fright at a good price. I tried the shopo vac, it works, just messy.
  6. rickw

    rickw Master of the Pit OTBS Member

    When I hose out my offset I do it while it is hot and there's a fire in the firebox. I just build a bigger fire and it dries out from the heat.
  7. smokemifugotem

    smokemifugotem Meat Mopper SMF Premier Member

    Why not just start a fire in it and boil it out???? Please... someone correct me if this is a bad idea, cause ive done it a time or two and dont want to ruin my smoker.
  8. pops6927

    pops6927 Smoking Guru Staff Member Moderator Group Lead OTBS Member SMF Premier Member

    Just pick it up, turn it upside down and shake it a few times... [​IMG]

Share This Page