just smoked in my modified char-broil

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

heliboydoesbbq

Meat Mopper
Original poster
May 22, 2009
150
21
Palmer Alaska
OK so I'm a FNG to smookin BUT I have loved it since I was a wee bain.

I was a raft guide for 6 endless summers (read as 12 seasons back to back) I utilised a dutch oven a lot! I also cooked over the open coals A lot!
I saw my first REAL smoker in Texas and was hooked. Soo I was turning everyting Isaw into smokers.. Fridges, old oil tanks,drums, propane tanks, the odd abandoned airplane or two,.., even the pet cat. (no really)

All I got is a char-Broil Grill that my father in-law gave to us a few years back.
I was determined to make it a smoker.. its a Lowes brand with Zero tolerance for low heat really.. I added a baffle palate in the back to reduce the departure of presious smoke. and I remove the right grill and "flavorisor" to put the wood chip device on the burners.

To date I've smoked 15-20 baby backs,several briskets, several spatchcocked chickens a couple of turkeys,

and TONIGHT my first fatty and those japinoe and cream cheeze thinigs with a beer can chicken ..

BUT its very very tempremental as the wind ... any wind will kill the temp,,. the smokin part is on the primary burner(out of 4) set on WAY low. the first batch of chunks and chips ( a mix works best) is great, the second batch usually takes way too long to catch and start smokin. so here it goes.. life is good!
17f36b67_vbattach21310.jpg

96173693_vbattach21311.jpg

e473cf0a_vbattach21312.jpg

7d24c345_vbattach21313.jpg
 
Welcome to he SMF, enjoy your holiday weekemd. It's all good my friend.
 
welcome, got to spend a little time in your neck of the woods last year, nice country, can't wait to get back.
 
Welcome to the forum. Qview right out of the gate! I'm impressed.
icon_lol.gif
 
Welcome heliboy! Looks like your doing good. Nice smoke ring on that fattie! I also look at everything I see as a potential smoker, I just don't have the tools ar skills to make it happen.
 
Pa with four.. its a Kiwi Flag actually but I'm not particular. And after three posts I figured out how to make the pictures better, bigger, with more cowbell..


The Mod is just a piece of 14g steel that is cut with in 1/8th inch of the sides and top of the rear of the CBroil. I can use one burner on the lowest setting and still have to turn it up later, like wise I take out the left side grill and flavorizor panels and put the chip tray right on the burners.

I only have problems when I try to light the 2nd round of chip and chunks at the 1/2 usually takes way to much heat to get going and the smoke prefomance in lacking for awhile. suggestions? I'm going to prelight them next time on the side burner I think.

I monitor the temp inside with the unrealable factory thermo and a second slow soak type thermo filling the hole where the roti attachment would have gone.

Cheers !!

May the Smoke be with you!
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky