IQ 110/ Brinmanns Smoke N Pit

Discussion in 'Slicers, Grinders, Tools, Equipment' started by danbono, Oct 13, 2013.

  1. danbono

    danbono Master of the Pit OTBS Member

    Hi All I'm considing the IQ 110 for my Brinkmanns Smoke N Pit. Has anyone used the IQ 110 of there Brinkmanns Offset smoker.

    Trying to find the best to hook the 110 up to my smoker.

    Thanks Dan
     
  2. Not sure if this is the same cooker but if so I had one years ago.  I simply used the "dog bowl" and attached it to the fire box vent.  I've since ditched the Brinkman (rusted out) and the iQ (found I didn't need it for the WSM).

     
    Last edited: Oct 14, 2013
  3. danbono

    danbono Master of the Pit OTBS Member

    Hi Here is a pic of my vents/door. Your vent door looks like solid door?

    Got some E-mail responses from the IQ company. They suggested the bowl also.

    So I just use the toggle nut and tighten that into one of vents and close off the other vents on the door.

    Should the smokestack vent be wide open?

    Thanks Dan

     
  4. I recall a vent on the door very similar to your schematic. I think the "dog bowl" is your adapter.

    I think I ran with exhaust wide open. It was several years ago and I have CRS.
     
    Last edited: Oct 14, 2013
  5. danbono

    danbono Master of the Pit OTBS Member

    Hi Here is another pic of what my vents/door looks like.

    Thanks Dan

     
  6. danbono

    danbono Master of the Pit OTBS Member

    Bama BBQ  How good did the IQ 110 work on your offset.

    I've read that IF you firebox & pit are NOT sealed well, the 110 does not work as good?

    Thanks Dan
     
  7. danbono

    danbono Master of the Pit OTBS Member

  8. danbono

    danbono Master of the Pit OTBS Member

    Hi All  Not much info. on the Auber. I'm guessing no one here uses the Auber of there COS?

    Thanks Anyway Dan
     
  9. You are correct. I had a small fortune tied up in sealant until I cut my losses and went WSM.

    I ended up selling the Pitmaster. I found it less stressful just to control the vents myself. The WSM makes it VERY easy to do.
     
    Last edited: Oct 26, 2013
  10. danbono

    danbono Master of the Pit OTBS Member

    Hi Bama BBQ  Do you think the Auber will work OK on my Brinkmanns Smoke N Pit?

    Thanks Dan
     

Share This Page