Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
How do you install this stuff, I'm getting so 1/2" rope for my door but I don't know how to install it? Do I just use self tappers screws or do I glue it on with the fireplace glue? Thanks for your help.
There is a specific adhesive for it. Red Devil is one manf. but whoever made the gasket matl. should carry something. Be sure it's used in a location where fibers won't fall on your food.
The gasket I used came with a tube of adhesive that gets hard like concrete. I ended up using silicon. Just put it on set the gasket and closed the door. Ready to go the next day.
I tried using Grapho-Glass from Rutland to seal the lid of my ECB. There was about 7 to 10 feet of fire resistant rope gasket with a tub of gasket cement. I sanded the lid to help with adhesion - it worked but separated from the lid after 6 or so smokes. Now I simply wedge the gasket into the gaps between the lid and smoker body.
Not exactly what it was intended for but I had to try something. It might work for you, though.