Injecting whole chicken and other chicken questions

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

mnduckhunter

Newbie
Original poster
Nov 30, 2009
28
10
I have done this with beer can chicken that I grilled.

My question is, How long and what temp do you smoke it at? I'm using a Cajun Injector electric smoker. I believe it only gets to 275 degrees I believe.

I have 9 whole chickens to try and smoke up. These range from 5 to 8 pounds.

How should I smoke the chicken if I half them?

Thanks for the help.
 
Always take to temp and not time. 40-140 rule always apply. I don't have that smoker so I wouldn't know how to get colonels skin on it. USDA recommends  180 internal temp. 
icon14.gif
 
We do beer can chicken in the smoker all the time. Get a good temp probe & smoke until breast is 165 and thigh is 175. Let it rest for 15-20 minutes & carve it up.
 
I have one of those remote temp probes that I got a while ago. I don't know the brand of it.

With the beer can chicken, do you add anything to the beer? I add some herbs and sometimes garlic in there. I also coated the chicken with vegatable oil every 30 minutes or so when I was grilling it. Is that a good idea?

Thanks for the help so far. This newbie is open to all suggestions on doing this.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky