Inexpensive stuffed jalapeno holder

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

prudentsmoker

Fire Starter
Original poster
Jul 20, 2013
49
10
Wichita KS
Not wanting to spend $20 on jalapeno holder I built my own. Bought 2 cooking cooling racks from Dollar Tree for $1, Bought 8 ea. 1/4" fender washers, 4 ea.3/4" hex head bolts and nuts from the hardware store. Turned the racks 90 degrees to each other and bolted them in each of the four corners and voila. Total cost was less than $4 and this has a lot more than 20 holes. Should work equally well for ABTs.  
 
Not wanting to spend $20 on jalapeno holder I built my own. Bought 2 cooking cooling racks from Dollar Tree for $1, Bought 8 ea. 1/4" fender washers, 4 ea.3/4" hex head bolts and nuts from the hardware store. Turned the racks 90 degrees to each other and bolted them in each of the four corners and voila. Total cost was less than $4 and this has a lot more than 20 holes. Should work equally well for ABTs.  
got any pics?

Would you mind popping over to Roll Call and let us welcome you to SMF? 

Kat
 
Last edited:
Glad you joined the group. The search bar at the top of any page is your best friend.
About anything you wanna know about smoking/grilling/curing/brining/cutting or slicing
and the list goes on has probably been posted. Remember to post a QVIEW of your smokes.
We are all smoke junkies here and we have to get our fix. If you have questions Post it
and you will probably get 10 replies with 11 different answers. That is because their
are so many different ways to make great Q We all have our own taste.

When you get a chance will you drop by roll call so we can all give you a proper SMF

welcome. Also will you add your location to your profile.

AND WE WANNA SEE SOME PICS!

worthless.gif


Happy smoken.

David
 
Not wanting to spend $20 on jalapeno holder I built my own. Bought 2 cooking cooling racks from Dollar Tree for $1, Bought 8 ea. 1/4" fender washers, 4 ea.3/4" hex head bolts and nuts from the hardware store. Turned the racks 90 degrees to each other and bolted them in each of the four corners and voila. Total cost was less than $4 and this has a lot more than 20 holes. Should work equally well for ABTs.  
Nice idea - I like the simplicity!  I'm pretty sure I have everything to make one right now - I'll have to check... Thanks for sharing 
smile.gif
 
Really easy from iPhone. At the top of the reply box there are three boxes the third box has a mountain. Click that box and add select your photo.
 
Sounds like a good idea, but as already stated a pic is worth a thousand words.

Also, it may take a while for the pics to post because of the new member status but don't be discouraged!  That's just the software protecting us from SPAM!

Bill
 
I think I know how to post the picture now, but have to use a different computer and am going to church. Will try this PM. Thanks.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky