ID Freezer...

Discussion in 'Fridge/Freezer Builds' started by jay bowen, Jun 24, 2016.

  1. jay bowen

    jay bowen Newbie

    Can anyone ID this freezer brand/model?  Clue of era it was manufactured? Friend sent me the pics but it is 100 miles away want to take a stab here before making the drive. Thanks all!

  2. Hello and Welcome to our addiction.  Many good folks here with a load of experience that they are more than willing to share.  If you have specific questions just start a thread and someone with experience will be along soon to offer advice.  All info you can provide us with such as smoker type, location and so on will help us answer any questions you may have, and pictures help a bunch.  Spend some time doing some research on the forums, tons of advice and recipes already available there.  Check out Jeff’s 5 day smoking E-Course ( link below ) that will help you get started.  Couple other good threads to help you get started included.  We look forward to your contributions.  Have fun.  Good luck.  Keep Smokin!


    I can not help with the ID.  Everyone knows I have this "bee in my bonnet" about galvanised.  NO! there is no scientific proof to back me up; I just would not use it.  IF you can confirm the interior is stainless and not galvanised, depending on price; I'd drive 200 miles to get it!  It looks in good shape.  Good luck.

  3. jay bowen

    jay bowen Newbie

    Thanks kindly for the reply and references! Once I put eyes n hands on unit I'll make the decision to pull trigger. Looking to contributing to forum.
  4. jay bowen

    jay bowen Newbie

    So I pick the unit up working for < $100...  Turns out it is an all aluminium Cres-cor frig.  I have removed the insulation thus far.  

    Heating source:  18 cu.ft interior

    I have pondered both DIY and manufactured units (SmokeDaddy Pro).  At this point I am leaning towards a PID controlled 220v / 4000w build with this element:    this will fit nicely in the newly vacated compressor compartment.

    I like the idea of a automatic PID controlled gas/LP powered rig but that seems a little more involved. 

    I have read just about every post on here concerning electric builds from 110v/1500w to 220v/5000w.   I am wanting to hear from the experienced builders here to give there 2 pennies...   Post away!
  5. Hello.  I can't help with the PID.  I am still using caveman style.  [​IMG]   I know the PID's are popular.  Glad. you got that unit.  Looks like it will make a cracking smoker.  Good luck.  Keep Smokin!

  6. madman mike

    madman mike Smoking Fanatic

    Use this controller. Its already built for you and it has more options than you can build yourself.

    Also, that looks like a warming cabinet not a cooler. Sure its a cooler?
    Last edited: Jul 3, 2016
  7. jay bowen

    jay bowen Newbie

    Yes... Compressor is on my shop floor now ;)
  8. jay bowen

    jay bowen Newbie

    Anyone wanna take a shot helping me with a wiring diagram with this setup? Many thanks!

  9. earlgress

    earlgress Newbie

    Did you ever get this built?

Share This Page