I want to "mailbox" mod my MB Dual Fuel Pro, 30"

Discussion in 'Propane Smokers' started by hextejas, Jan 13, 2014.

  1. hextejas

    hextejas Newbie

    and was wondering if it would work out ok. I use the AMZNP ? and it would work a lot better if it were in an external housing like the mailbox.

    So, this is a picture of the side of my MB showing the vent and an attachment that is meant to be able to attach the propane tank. I never use it for that so I was thinking of using it to attach the mailbox.

    The size of the vent is approx. 4.5" in diameter and I can take the movable vent plate off leaving the 4 holes. 

    Should I cut the vent to get rid of those arms sticking into the hole, making it a full circle ?

    The vent on my MB is quite a bit lower along the side of the smoker than is the MES and would that make any difference ? That is the smoke is being introduced into the smoker a lot closer to the burner than in the MES.

    Also, if I could figure out a way to hang the mailbox from the propane tank attachment rather than to set it on top, I think I could get closer to a straight in path.

    What do you think  and thanks.

Share This Page