Home made UDS Help

Discussion in 'Electric Smokers' started by efaden, Dec 31, 2011.

  1. efaden

    efaden Newbie

    So I mounted a 3500 watt oven element at the bottom of a 55 gallon drum. Everything works fine except the smoke. I placed a aluminum disposable pie plate with chips on the element and it melted... See picture. Now I have three fire bricks under it so it is off the element by an inch and it's not smoking at all... What should I do?[​IMG]

    -Eric

    Sent from my Incredible 2 using Tapatalk
     
  2. rbranstner

    rbranstner Smoking Guru OTBS Member

    Might need something more sturdy like a cast iron pot or some type of metal box to use a chip pan.
     
  3. efaden

    efaden Newbie

    That was my plan... just wanted some other input.  So basically just use a cast iron box or something to put directly on the burner?

    -Eric
     
  4. smokinal

    smokinal Smoking Guru Staff Member Moderator OTBS Member ★ Lifetime Premier ★

  5. efaden

    efaden Newbie

Share This Page