Hey all!

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

synderblock

Newbie
Original poster
Apr 16, 2016
9
10
Roll call post. Been visiting the site for about 9 months, decided to officially sign up. I got my first smoker (MB dual fuel 2 door) last fall. I'm in the Pacific NW and don't have a permanent location (cover) for my smoker, so I used it for only a few months before the rains forced me to store it. Broke it out 3 weekends ago, used it every week since. Gorgeous weather today, decided to do my first corned beef pastrami (posted it over in the Beef forum, pics included!) I also did the needle valve mod this weekend as I've struggled to get my MB under 250, thanks to all the members who have contributed to that solution in the past. Smoke on!
 
Last edited:
Welcome to the site, hope that needle valve mod is working out for you.  I start out on propane but moved onto charcoal just cause I like playin with fire.  How about sending some of that nice weather on up my way, Good luck and good smokin.
 
Welcome to the group!  Happy smoking.  I'm gonna head to the beef section to check on that pastrami!

Mike
 
Welcome to the site, hope that needle valve mod is working out for you. 
It worked, but I need to "redo" it. I got the Bayou Classic valve that has been noted on here, and I opted to attach it just off the smoker instead of off the regulator - I was in a rush and went to the local hardware store instead of the gas store. Had to buy 4 additional parts to get it in line, and it's too long (had to raise my smoker up to accommodate the length). It should only take 2 parts I think/hope.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky