GOSM Big Block Regulator Help Please

Discussion in 'Propane Smokers' started by flatbroke, Jun 28, 2008.

  1. flatbroke

    flatbroke Smoking Fanatic

    I had a recent fire while smoking and it consumed my regulator and hose where it attaches to the Propane tank.

    I checked all over town, (pretty small and slim options) for a suitable hose, but nobody carries the fittings (square shape) that attaches to the piece the knob that controls the flame that you slip into the burner. Sorry for being ignorant and not knowing the proper names.

    any way does anybody the original paper work that shows the part number for the regulator assembly. I need to buy a new one if it is possible.
     
  2. pineywoods

    pineywoods Smoking Guru Staff Member Administrator Group Lead SMF Premier Member

  3. flatbroke

    flatbroke Smoking Fanatic

    Thanks I will check it out.
     
  4. flatbroke

    flatbroke Smoking Fanatic

    Looks Like I need the part number, I think the regulator came as part of an assembly and I need the part number to find out which to order.

    Pineywoods good find you hooked me up big time. thanks again.
     
  5. erain

    erain Master of the Pit OTBS Member SMF Premier Member

    mine is labeled from "Marshall Gas Controls" and model # 45I, also my GOSM is an old old model, prob 5-6 years old but is a big block. hope it helps out!!!! we got to get that smokin again, this time TBS!!! glad we can laff about it!!!
     
  6. flatbroke

    flatbroke Smoking Fanatic

    Still looking for the part number for the knob/hose and regulator assembly so I can purchase a new one, anybody still have there paper work?
     
  7. richoso1

    richoso1 Smoking Guru OTBS Member SMF Premier Member

    This is from my copy of a PDF file.

    11 1 Control Panel Assembly AZ002058
    11a 1 Push-Button Igniter AZ002016
    11b 1 Control Knob AZ002015
    Hope this helps. If needed, pm me and I'll send a copy of the PFD file to you.
     
  8. pineywoods

    pineywoods Smoking Guru Staff Member Administrator Group Lead SMF Premier Member

  9. justsmoke2

    justsmoke2 Smoking Fanatic

    I don't know if this will help you but this is off the Big Block.

    Burner chamber Assembly AZ001145

    It shows the whole assembly with burner, knobs, and tank hookups in one piece. I can break it down to smaller parts but by the sounds of it you need the whole thing. here is phone # not sure if its good or not. 1-888-869-5454 as this is a older model.

    Hose/Valve/Regulator Assembly (HVR) AZ001159
    Rotary Ignitor AZ000305
    Ignitor Knob AZ000604
    Control Knob AZ001510
    Control Panel Nameplate AZ001136
    Ignitor Electrode Assembly AZ001158
    Venturi AZ001157
    Gasket AZ001156
    Brass Burner AZ001155

    Thats all the part numbers I have. These are part numbers from 2003 booklit for GOSM Big Block
     
  10. flatbroke

    flatbroke Smoking Fanatic

    wow, the part just cost me 84 bucks, holy moly. thanks for everyones help. kinda hard to pull the trigger on it but I purchased it anyway. heck I saw where a couple peeps on the site bought the whole unit for less than that.
     

Share This Page