ge 1000 watt hot plates

Discussion in 'Electric Smokers' started by deerjackie, Dec 25, 2009.

  1. deerjackie

    deerjackie Fire Starter

    i converted my 55 gal drum smoker to electric using 2,1000 watt ge hot plates.i am going to use one for the smoke and one for heat. will the cords and units take the 180 deg heat with the units sitting on bricks or should i get some split wire shields like on car wires around engine?
     
  2. smokingohiobutcher

    smokingohiobutcher Master of the Pit OTBS Member

    I would get some sort of shields....Better safe than sorry![​IMG]
    L8ter SOB
     
  3. morkdach

    morkdach Master of the Pit OTBS Member

    i change mine out to a teflon wire to be safe
     
  4. deerjackie

    deerjackie Fire Starter

    i will either do that or add a round plate with two holes the size eyes above them so only the heating element is exposed to heat.
     
  5. builder59

    builder59 Smoke Blower


    I don't know if this would work. Seems pretty cool.


    Model HP22S36- 22-inch diameter hot plate shown on optional casters, with extra power for warming a full 55- gallon drum. Temperature is controlled with an analog AH thermostat. Drum not included.






    [​IMG]

    STANDARD MODELS include steel plates
    Thermostat may be mounted or remote

    [​IMG]Model HP18S16 will heat 20 gallons of water in a covered stock pot from 70F to 210F in 2 hours [​IMG]Model HP22S42 will heat 20 gallons from 70F to 210F in 55 minutes. [​IMG]Due to lower specific heat values, most liquids and blends will heat faster than water, .
    Contact Wenesco for quotes on your unique size and power requirements.



    [font=Century Gothic, Arial, Helvetica] [font=Arial,sans-serif]S200 Insulation Blanket[font=Arial,sans-serif] (shown below) maximizes heating efficiency when heating drums as heat loss is significantly reduced. [/font] [font=&quot] The S200 blanket is durable and flexible, and complements any 55-gallon (208 liter) metal or poly drum. [/font] [font=Arial,sans-serif] For indoor use.[/font][/font]

    [/font] [​IMG] [font=Century Gothic, Arial, Helvetica] [font=Arial,sans-serif]Heavy-duty aluminum foil surface[/font]

    [/font] [​IMG] [font=Century Gothic, Arial, Helvetica] [font=Arial,sans-serif] 1.5" (38mm) fiberglass insulation[/font]

    [/font] [​IMG] [font=Century Gothic, Arial, Helvetica] [font=Arial,sans-serif] Closure via flexible cords with S-hooks [/font]

    [/font] [​IMG] [font=Century Gothic, Arial, Helvetica] [font=Arial,sans-serif] 450°F (226°C) maximum exposure temperature on drum surface [/font]

    [/font]


    [​IMG]
    [font=Arial,sans-serif] S200 Insulation Blanket shown wrapped around a drum which is mounted on a HP22 hot plate. Blanket price: $198[/font]


    Wenesco also offers customized hot plates; please contact us with your requirements

     

Share This Page