Food transport cart build-need guidance

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

mortyz71

Newbie
Original poster
Jan 20, 2016
1
10
Hi everyone
I recently acquired a stainless food transport cart as the foundation for my smoker build. I've already ordered my smoke daddy pellet hopper/controller for the heat source. I'll start by tellin you my plan then you guys feel free to tell me where I'm going wrong. My plan is
-install pellet hopper on lower left side with heat deflector and water pan on top of that.
-cut in and use 3" stainless exhaust pipe for a stack on the lower right side just above the lowest rack.
-expanded stainless for cooking racks
-I also want to make a panel to cut the cabinet in half for smaller cooks and just put a stack that can be capped on the top left side
-plan to insulate but probably not right away
Any guidance is much appreciated
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky