First UDS Build

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

wormtown q

Fire Starter
Original poster
Picked up an unlined, food grade, open head 55 gallon drum for $20. Got it home drilled the holes needed for the grates and intakes, still trying to decide what to do as far as exhaust (actual chimney, holes in the top, etc.), open to any suggestions or advice based on experience. Here is the first pic burning it out. More to follow.
 
Been a long time getting to this point but just about finished. Still need to figure out my chimney but paint and clear coat are on (duplicolor engine enamel and clear coat), just needs
GALLERY]
to cure for a few days then needs a low fire to set the paint, coat and cure the interior and it will be good to go. Latest Pictures below. More to follow.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky