First-timer's mods to Char-Broiler SFB

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

steammaker

Newbie
Original poster
Nov 12, 2013
6
10
Sacramento, CA
The offset got the usual mods of tuning plates, large charcoal basket, large brick heatsink, and baffle. I also sealed the side firedoor to keep cold air out with a welded door jam. I also sealed the stack, but did not make the extension on the inside, as it already is only four inches off the grate. The mods worked great during seasoning, keeping the temps at 250 on both sides always within 10 degrees, usually within 5 or less, with adjusting the fire or stoking it three times for six hours once the temp was set.




 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky