First smoker build RF

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
48x20 cc 12208 cubic inches
18" square box 5832 cubic in
4069 cubic inches recommended so is this much bigger ok?
And the chimney is 4"pipe 24" tall
does this mean 24" from top of cc or does it include the amount protruded into cc
 
48x20 cc 12208 cubic inches .....  15,000 +/-
18" square box 5832 cubic in    +++++  PERFECT+++++
4069 cubic inches recommended so is this much bigger ok?
And the chimney is 4"pipe 24" tall
does this mean 24" from top of cc or does it include the amount protruded into cc
 
Last edited:
I meant to put 48x18 it may be 19 though would the calcs still be pretty good I would assume so and how high do y'all usually put the rd plate from bottom of cc is it just a continuation of top of fb?
Thanks for any insight!
 
I like smoker builds, be watching

Gary
 
Appreciate the tutorial The only question I have now is how far does the fire box go in to the cc i think ive got the rest planned out pretty well ordering plate and and other materials tomorrow!
 
Appreciate the tutorial The only question I have now is how far does the fire box go in to the cc i think ive got the rest planned out pretty well ordering plate and and other materials tomorrow!
Just past the weld, so the RF plate will have straight sides...
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky