Firebox door design

Discussion in 'Reverse Flow' started by bridensam, Jul 27, 2013.


  1. Hello everyone,
    I am building my first reverse flow and I am looking for ideas for my firebox door. Here is a pic of the firebox. My build is a 24x60 tank with a 24x20x24 firebox.
     
  2. Just use a flat plate of 1/4" or 3/8" A36, use some 1/2" 0r 3/4" angle and frame in the top and sides of the box to give it more seal.  I recomend double plating the top of the firebox with a small air gap between the plates .

    [​IMG]
     

Share This Page