fire grate question

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

smokin t

Newbie
Original poster
Feb 12, 2009
14
10
Northen New Hampshire
I am in the process of building a reverse flow and had a question about the spacing between the fire grate bars, I plan on using 1 1/4 x 1/4 angle iron with the point up.  I was wondering how much space to leave between them at the low spot.
 
The grate in my stick burner is made out of a piece of industrial decking.  The horizontal bars are an inch apart, which is too big if you are going to use anything except sticks.  I just threw a piece of expanded metal over mine and it works great.  Awesome air flow.
 
5/8" rebar, 5/8" spacing here as well.

91328599_2835696490041211880S600x600Q85.jpg


d3b3edc2_2586539860041211880S600x600Q85.jpg


094414b7_2818270890041211880S600x600Q85.jpg


576e3376_2328746780041211880S600x600Q85.jpg


8fa22101_2707458740041211880S600x600Q85.jpg
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky