Finish Temp for BB Ribs?

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

brohnson

Smoking Fanatic
Original poster
Jan 11, 2010
351
10
Michigan
I see a lot of people's recipes and stuff but I cant find what you all finish your ribs out at? I also see most people cook them around 225 degrees. So my question is what temp do you cook your ribs at and what temp do you pull them out at? Thanks
 
I smoke that at 225°, and on the average they go for a total of 5-6 hours. I don't monitor internal temp on ribs, not much area to insert a meat probe. That's just my style of doing ribs.
 
I do my pork ribs between 225 and 250, they are done when they are done. Most folks dont cook ribs to a temp, but until they have the feel they want, Once mine pass the tong test, they are done.

On the WSM that means about 4.5 hours +/- for bb's, and 5.5 hours +/- for spares. No foil, and maybe a squirt of tart wash around the 2 hour mark.
 
i use the minion/Kiss method for the WSM to get my lump lit, and then let it run another 30 minutes of so to get a steady temp belfore putting anything in it.
 
Can you show me a link to your 2-2-1 method, I'd like to check that out and is this all done in the smoker still or does it go to an oven?
 
Go to the SMF main page and look at the how to articles by jeff on the left side. There will be a link for 3-2-1 rib method. The 3-2-1 method is for spare ribs as they need a little more time to cook. BB's work perfect on the 2-2-1 method. Rub your ribs down then throw them on the smoker for 2 hours then foil them for 2 hours (you can add any kind of juice to your foil. I like Apple juice) then remove the ribs from the foil to firm up for the last hour. Once they have been on there the total 5 hours I take them off and put them in foil and let them rest for as long as you need to.
 
Yeah I use the 2-2-1 method & look for pull back or just hold up one end & if the other end bends 90 degress your probably good
 
I'm like most of the folks here ribs are just about the only thing that I smoke by time. I use my 2-2-1 method for baby backs and the 3-2-1 method for the spares. I also check them for a good pull back and the tong test too.
 
I have read to stick the temp probe into the meat parallel to the bones, but not touchung......"FALLING OF THE BONE" I know is supposed to be 200*.


Rick
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky