Electric smoker build

Discussion in 'Other Builds' started by country1961, Mar 26, 2014.

  1. country1961

    country1961 Newbie

    I've been asked to help a friend wire up the controls for an electric smoker. He has brought me a TA4 temperature controller and an SSR. To begin with the contact configuration listed on the pdf is much different than the schematic on the relay. i HAVE FIGURED THAT PART OUT. But, I am stumped about where is the electric burner leads supposed to connect.
     
  2. radioguy

    radioguy Smoking Fanatic

    Country,

    Hello.  Welcome.  I see this is your first post.  Please take some time and swing over to Roll Call and introduce yourself so that we may give you a proper "Hello".  All info you can provide us with such as smoker type, location and so on will help us answer any questions you may have.

    It would be a big help if you posted a drawing of what you have or think you should have. There are many controllers out their and pin outs may differ from device to device. You can search in electric builds too....lot of information on this site. Search is your friend.

    Most important be safe and use sound practices when messing with electricity.

    Welcome to SMF!

    RG
     

Share This Page