Easy little chief mod

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

poeschel

Newbie
Original poster
Jan 28, 2016
2
10
Pittsburgh
Hey guys, new here. I did a lot of lurking before deciding to join here, very cool site. While lurking here and all over the net, I noticed the main mod for little Chiefs was to by a hot plate and swap out the burner and use the temp control. This works great but if your looking for a very fast and easy mod, here's what I did. I bought my first LC about 10 years ago and between a few moves and lots of use, I decided to replace it with a newer one. When I got the new one, I noticed the burner was slightly different (longer). While looking at Smokehouse Products website, I saw the BC burner on new versions is the same length as the LC. So I bought one and swapped it out. Almost a direct replacement besides the front burner support which doesn't matter. I now can get to 250 degrees with a 35 degree ambient in about 25 minutes.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Clicky