Doin some cheese! Qview

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

xjcamaro

Smoking Fanatic
Original poster
Mar 16, 2009
313
13
Western PA
So i was cold smoking some bacon and decided to throw in some chese since i had the room. I put in some mozz, swiss, and colby jack. I usually do this in the colder months and didnt really think about temps but when its 90* in the shade i guess its going to get a little warm in the smoker. I didnt really have a big heat source i use the soldering iron and tin can method for cold smokes so the only heat is what comes off the soldering iron. Well i put everything in with some hickory and left it for a couple hours.

When i went to check on it this is what i saw. So i guess the temps got up there. It was just a hair over 100*

38e66ab0_melted.jpg


So the rest of the cheese was getting a little soft so i grabbed them out and stuck them in the freezer for about and hour to firm up. I also reformed the melted peice. Then i put them back in the smoker for a couple more hours. That did the trick and they were fine from there on out. Here are the pics of when i pulled it out.

a17b23dd_smoke1.jpg


bf3925c1_smoke2.jpg


a3696f59_smoke3.jpg


And here is link to the bacon if you want to see it.

http://www.smokingmeatforums.com/forum/thread/108372/im-back-more-bacon
 
2 for 1 smoke....I like it!

Your cheese is probably directly above the soldering iron, and took the direct heat, as it was rising

I bet if you made a heat deflector, it would help, or use a jug of ice.

Glad you salvaged the cheese!

Todd
 
I don't know where you are but it looks like a problem I could have.  In my climate I have to do cheese smokes at night this time of year, and maybe even add a jug of ice.

Good luck and good smoking.
 
Nice Job,  Like Todd said either use a Heat Deflector or Ice or Both...
 
Sometimes when I'm doing cheese I put a catch bowl underneath a couple of them. Tried it by accident one time and got a great mix of cheddar with a pepper jack.  They melted together in a marbled kind of way and was fantastic.  Looked weird, but tastey!  
 
It just never hit me about the temps cause like i said i usually dont do alot of cold smoking in the summer, its always in the colder months and i dont have to worry about it, but lesson learned. A jug of ice or deflector will be used next time.

I know your suppose to let it sit for 2 weeks but i had to hack a chunk off the colby while i was vacuum sealing everything and dang! i dont think it needs to sit 2 weeks.
 
I'm not waiting 2 weeks for this cheese! I busted it out last night and it all tastes awesome! Sorry!
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Clicky