Dirty Door Temp Gauges

Discussion in 'Messages for All Guests and Members' started by flash, Feb 3, 2010.

  1. flash

    flash Smoking Guru OTBS Member

    I was wondering, these tend to get quite dirty over time and wondered if it was worth while to clean them or would a dirty one throw off the readings on these replacement gauges I get from Lowes and such. Those prongs can get pretty nasty looking after quite a few smokes.
  2. cheech

    cheech Master of the Pit OTBS Member

    try to wipe them down with a damp cloth of dish detergent and water. Do not have the cloth dripping wet but damp
  3. mballi3011

    mballi3011 Smoking Guru OTBS Member SMF Premier Member

    Actually my Smoke Vault's thermo meter in the door in pretty close to right. Ok get back up now and it's true.
  4. rickw

    rickw Master of the Pit OTBS Member

    I clean mine every now and again. Can't say I've seen a difference.
  5. mudduck

    mudduck Smoking Fanatic

    my gosm door is abount 20 deg off to the cold side
  6. denver dave

    denver dave Smoking Fanatic SMF Premier Member

    Don't believe mine. I use a digital.
  7. Same here, mine is only 20 degrees low.[​IMG]
  8. meateater

    meateater Smoking Guru SMF Premier Member

    Not really sure what kind of smoker you have. I put a therm on the lid of my UDS, it's just for reference. I use a steel brush on the probe here and there to remove the buildup.

Share This Page