Custom Intake Suggestions?

Discussion in 'UDS Builds' started by bamasmokin, Feb 4, 2015.

  1. bamasmokin

    bamasmokin Newbie

    Hey guys, building my second UDS and considering something other than the standard pipe and cap for intakes, but coming up short on ideas. You guys have any ideas, photos, and suggestions?
    Thanks in advance.
    James
     
  2. jckdanls 07

    jckdanls 07 Master of the Pit Group Lead OTBS Member

    years and years ago I made one.. cut a square hole out on the side at the very bottom and just used a rock to open and close the hole up... worked really well... only used it to smoke mullet ....
     
  3. Be looking forward to seeing pics

    Gary
     
  4. The Gateway UDS looks to have a pair of 1.5 or 2 Inch pieces of Exhaust Pipe welded to the side, extending up with a Side Sliding Intake Valve made about like the Exhaust Stack Top on most Offsets.

    You would probably need a muffler shop to put a 90 on the end of the pipe, Then Chop Saw it close at an angle.

    [​IMG]

    Bob
     
    Last edited: Feb 24, 2015

Share This Page