CSR-Bone in a little late.

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

garyinmd

Smoking Fanatic
Original poster
SMF Premier Member
Jan 27, 2011
310
17
Sioux Falls, South Dakota
Sorry for the late post, found some Bone in County Style Ribs and made them last week. 

Just the two of us today so went with a small package.

480b8626_DSC01589.jpg


Ended up with 3-4 different rubs in the cupboard, did not end up in love with any of them so mixed together to see

what happens.  The combined rub had a fair amount of heat which I dont really care for so went a little light, into fridge Friday night for a rest.

6d2133d4_DSC01591.jpg


Next day getting the MES ready to go.  Using apple sawdust in the AMNPS, here it ready to go.

65c514c9_DSC01593.jpg


Was able to keep ribs to the right so the AMNPS gets set on the lower grate instead of next to the heater on the MES30.

154cc4b4_DSC01597.jpg


After a couple of hours in foil with just apple juice.

bc0ceb74_DSC01599.jpg


Had some buns that we needed to get used up, made into garlic toast in oven.

5887c517_DSC01602.jpg


Sue made some sweet potatoes, onions and hollowed out some squash and put some juice inside.

4a14a8e7_DSC01604.jpg


Pretty simple meal tonight, everything ready.

923aa4dd_DSC01606.jpg


Had the ribs in foil for 2 hours then back in smoker for the last hour.

4ba9f274_DSC01607.jpg


Another shot of the feast.

d7d66b7d_DSC01608.jpg


Sorry Bear, this is the best I have for Bearview.  Picture above was missing the baked tater shown here.

9e086bf6_DSC01610.jpg


The ribs were pretty good size and I was not sure the 2-2-1 would be enough but they came out pretty good.  This is the

second time I have done these and will probably adjust next time to 2.5-2.5-1 to try and get them a little bit more tender.

Thanks for looking

Gary
 
Great Job!

Great Plate!!!

Great Pics!!!

Thanks Gary---You're really on a roll here, Buddy !!!

Bear
 
Thanks Al, Roller and Bear.  Took the day off working on the house project, using storm as an excuse.  Gives me time to catch up on other things such a my negligent posting.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky