collapsible plywood Smoke house

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

mm178

Newbie
Original poster
Dec 10, 2011
1
10
I  am looking to build a Collapsible Plywood Smoke house.  right now I would only use the smoker a few times a year, and would like to be able to break down the unit and store when not in use.  I Live in South Dakota and temps during hunting season are anywhere from 40 degrees to -10. 

On the corners I could use some type of door hinge where i could remove the hing pin to break it down.  does anyone have any great Ideas?

thanks
 
Unless you have some type of gasket it will leak a bit of smoke. Cork or RTV might work for a gasket material. You could also line the corners with aluminum foil instead of using a gasket. It sounds doable to me.
 
Instead of aluminum foil use aluminum roof flashing to seal the corners.I will be reusable to save some 
dollarsign.gif
.
 
Last edited:
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky