cold smokin bacon

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

richard weaver

Newbie
Original poster
Mar 2, 2012
22
10
lancaster ohio go bucks
could you tell me how to get smoke at cold smoke temp of 100 dgs ? have a master elect smoker and my fire box will not start wood chips untill about 165 dgs . i know about curing and to use a pork side have made bacontwice first time way to salty solved that problem now it is to tough cooked at 170 dgs untill inter temp was 155 dgs . would like to cold smoke next time thanks dick
 
Got the perfect answer right here :  AMNPS!   http://www.amazenproducts.com   Owner and inventor is Todd Johnson, a moderator on here!  The only heat it puts out is a little bit from the pellets or dust smoldering.... add from 0 - whatever temp you want for heat!  Check it out and Todd will certainly be around to answer any questions!
 
  • Like
Reactions: stevenb1
Can't agree enough. AMNPS smoker is the perfect answer for me to cold smoke.

I've been double smoking my bacon. At least 6 hrs using AMNPS. Rest overnight, and

then conventional smoke to temp. Rest, vacuum pack, and freeze until needed.

Last batch was 32 lbs (3 bellies) in the fall.  Starting to run short so I started up a 12

pound belly earlier tonight. First time trying POPS liquid cure.  Eager to see how it turns out.

Enjoy!
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky