Canadian Bacon with Morton's Recipe

Discussion in 'Bacon' started by tasunkawitko, Dec 27, 2011.

  1. tasunkawitko

    tasunkawitko Master of the Pit OTBS Member

    x
     
    Last edited: Aug 12, 2013
  2. smokinal

    smokinal Smoking Guru Staff Member Moderator OTBS Member ★ Lifetime Premier ★

    Sounds like a plan!

                [​IMG]
     
  3. sprky

    sprky Master of the Pit OTBS Member

    Sounds like you have a good plan to me.
     
  4. well unsmoked canadian bacon is actually called  peameal bacon it would be sold just cured not cooked and rolled in peameal mostly today it is rolled in cornmeal I believe,

    also you shouldn't need take it to 160 the one recipe I have says to take the IT  to 142.

    I had another recipe tell me 147 but it also says not a problem to take it to 160

    I do not use this method of curing I inject mine and than soak in a brine for a few days and then  set them out to dry over night in the refrigerator, then I brush egg yolk on them b4 smoking to give the outside a golden color, then I put in the smoker with dampers open wide at 130 for a couple hrs to dry some more then up to 150 for an hour or so then I take the smoker up to 160 and wait for the IT to reach 142, but I also have taken it to 160 and thought it was just as good  and seemed a bit firmer

    I have taken it to different IT and every batch has been awesome and everyone has loved it, I have my father and uncles requesting it quite often
     
  5. tasunkawitko

    tasunkawitko Master of the Pit OTBS Member

    hey, casino -thanks for the tips and ideas. the 160 degrees was purely a guess, but i agree that the lower temperature would make a lot more sense, considering that it is a solid hunk of meat. i'll try something in the 147 range and see what happens.

    one of these days i will have to try injections, and if i ever do large hunks of meat with bone, it will be a must-do. for now, i'll try the dry brine in vacuum seal, which seems to work well for the smaller pieces of meat. the egg-yolk brush sounds good too, to give a great colour.

    thanks again! i am looking forward to the project.
     
  6. venture

    venture Smoking Guru OTBS Member

  7. mballi3011

    mballi3011 Smoking Guru OTBS Member SMF Premier Member

    [​IMG]

    Now I have done the recipe using brown sugar and tender quick. Then smoked to temp and it turned out really good and delicious to
     
  8. rstr hunter

    rstr hunter Smoking Fanatic

    I concur on the 142-147 temp I did some like you are doing last spring and took to 160 as that was FDA temp at that time.  Turned out OK but dry. Was planning to stop at 145 on my next batch. Make sure to post pics. 
     
  9. I let my first try at it go to 158 and it was a little dry. Sticking with the 145-147 is my opinion.
     
  10. tasunkawitko

    tasunkawitko Master of the Pit OTBS Member

    hey, guys - has anyone ever used mapleine when dry-curing canadian bacon? i'd really like to get some maple flavour in there while sticking close to the recipe above and usuing a dry cure. i've tied using maple syrup in ground venison bacon, but for this project it seems that mapleine woulf fit the bill more adequately.

    any experiences?

    thanks guys - looking forward to giving this a try.
     
  11. eman

    eman Smoking Guru Staff Member Moderator OTBS Member

    i use the TQ recipe when doing CB but add an extra TBSP of brown sugar per lb of meat.

     came out great.
     

Share This Page