burning barrel blues

Discussion in 'UDS Builds' started by smokin woodys, Oct 6, 2013.

  1.    Ok I already built a uds  u of m uds that works great.Some of my friends liked it so much they asked me to build them one.so i picked up some barrels with lids that had a paint liner in them.I burned them off and the outside I just use 150 grit and right down to metal like nothing flat.Iinside is a different story hard as hell to get out. My thought is if it dont burn out at high temp what is smoker temps gonna do and also they were food safe barrels so what would it hurt to just wipe them down and season them..Can someone give me some ideas[​IMG]      

                                                             Thanks SMOKIN WOODYS
     
  2. bmudd14474

    bmudd14474 Smoking Guru Staff Member Administrator Group Lead OTBS Member SMF Premier Member

    is it just paint on the inside or was it a plastic liner?
     
  3. Just paint
     
  4. s2k9k

    s2k9k AMNPS Test Group

    I've read on here of people getting them sandblasted rather inexpensively.
     
  5. motown-n00b

    motown-n00b Fire Starter

    I did mine myself and it was a pain to get all the paint off the inside. I bought a cheap sandblaster from the big orange box store. It worked but I didn't have a hood and it made the experience rather miserable. I've read that many auto-body shops will sand blast for you. I live just south of Lapeer and I found a few places in Lapeer that do sandblasting by doing a simple Google Maps search. I still need to post my build info.
     

Share This Page