blade for rival grind-o-matic

Discussion in 'Slicers, Grinders, Tools, Equipment' started by yount, Aug 18, 2009.

  1. yount

    yount Meat Mopper

    I have a old grinder here that my dad gave me we used to use it alot when i was a kid but somehow the blade got lost does anyone know where to get them it is a rival grind-o-matic 2100 thanks
     
  2. beer-b-q

    beer-b-q Smoking Guru OTBS Member

    Do you have a picture of the grinder, I may have one...
     
  3. yount

    yount Meat Mopper

  4. beer-b-q

    beer-b-q Smoking Guru OTBS Member

    Are you needing the grinding plate or the cutter blade? If you have a grinder plate give me the measurement of it or the diameter of the opening it fits in...
     
  5. yount

    yount Meat Mopper

    i need the cutting blade the measurement is 2 1/16 in side the housing
     
  6. beer-b-q

    beer-b-q Smoking Guru OTBS Member

    One more question, does it have a 7/16" or 1/2" square hole?
     
  7. yount

    yount Meat Mopper

    ok the square on the end of worm where the cutting blade would go is closer to 5/16
     
  8. beer-b-q

    beer-b-q Smoking Guru OTBS Member

    Let me do some digging and see what I can find in my junk parts drawer. I have been collecting meat grinders for years and never through away a part I may need.
     
  9. yount

    yount Meat Mopper

    thank you very much your help is much appreciated
     
  10. beer-b-q

    beer-b-q Smoking Guru OTBS Member

  11. yount

    yount Meat Mopper

    Thank you very much for your help.It is greatly appreciated.I will order the oster blade and let you know if it works thanks again.
     
  12. beer-b-q

    beer-b-q Smoking Guru OTBS Member

    Glad to have been of some help... Good luck. [​IMG]
     
  13. scarbelly

    scarbelly Smoking Guru OTBS Member

    Here is a link that have always found the parts I have needed for small appliances
    www.TheGourmetDepotCo.com
    This one used to be culinary parts warehouse
    Good luck
     
  14. yount

    yount Meat Mopper

    I know this is a old post but figured id report back the blade did work will be grinding some pork up for some kielbasa this weekend
     
  15. beer-b-q

    beer-b-q Smoking Guru OTBS Member

    Was it the one for the Oster or a different one?
     
  16. yount

    yount Meat Mopper

    yeah the oster the one that you linked me too thanks again
     
  17. mamaroof

    mamaroof Newbie

    Just found a Grind O Mat at a thrift store.

    It is missing the ring collar that holds the grinding blades in.

    Any idea where I might be able to find one?

    Thanks!
     

Share This Page