Black pipe for exhaust

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
It's not really needed. I use the 2" and 1" bung holes in my lid. I keep the bungs in when storing the smoker and remove both when smoking.

The big box stores won't have it. A specialty plumbing supply should have some. A steel supplier might but more than likely it won't be threaded.

Online Grainger would be your best bet.
 
I'll give the 2" and 1" bung holes a try!  Thanks
 
I found short 2 inch black pipe an caps at ace hardware. Use 1 2 inches long. I prefer the black pipe over the plain open bung as its easier to seal weather tight since my US usually sits out in the weather
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky