Black pipe for exhaust

Discussion in 'UDS Builds' started by netspec, Nov 28, 2015.

  1. netspec

    netspec Newbie

    Hello, 

    Where can I find 2" black pipe for USD lid exhaust?  
     
  2. dirtsailor2003

    dirtsailor2003 Smoking Guru OTBS Member

    It's not really needed. I use the 2" and 1" bung holes in my lid. I keep the bungs in when storing the smoker and remove both when smoking.

    The big box stores won't have it. A specialty plumbing supply should have some. A steel supplier might but more than likely it won't be threaded.

    Online Grainger would be your best bet.
     
  3. netspec

    netspec Newbie

    I'll give the 2" and 1" bung holes a try!  Thanks
     
  4. dcb5739

    dcb5739 Fire Starter

    I found short 2 inch black pipe an caps at ace hardware. Use 1 2 inches long. I prefer the black pipe over the plain open bung as its easier to seal weather tight since my US usually sits out in the weather
     

Share This Page