Big Block Gas Leak

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

smokeshow

Newbie
Original poster
Jun 30, 2010
10
10
Temecula, CA
I have had my Big Block for about 2 years now.

I went to do a smoke and I noticed a flame near the door after I let it heat up for a bit.  Gas seems to be leaking from the wire mesh in the gas line and it eventually ignites.  How do I fix this problem?
 
SS, morning.... sounds like something crawled into the burner and is plugging it....  take it out and clean it....  probably a spider or something like that...  

Dave
 
  • Like
Reactions: smokeshow
Yep.. that was the problem.  I found a video on youtube where they used a wire brush to clean.  i could not find that at Lowes, so I just used my garden hose with a fine stream spray setting  and flushed it with water.  The water sprayed out evenly through the burner holes, except a few that were blocked.  I used my finger to clean the debris until water came out evenly through all holes.

I hooked it back up and the burner was all blue flame on high...  just like the day I bought it 2 years ago!

Thx for your help. 
 
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Clicky