Amazin smoker question

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

connie lu

Newbie
Original poster
Aug 19, 2014
3
10
Michigan
Hi All.... Just got the amazin smoker pellet box and going to use it this weekend. I read to start it w/ a tourch.... Any other tips would be approximated. Thank you, Connie Lu
 
Get it burning good before putting it in the smoker.

You want a nice red cherry going.
 
Hi All.... Just got the amazin smoker pellet box and going to use it this weekend. I read to start it w/ a tourch.... Any other tips would be approximated. Thank you, Connie Lu
Connie,

I used mine for the 1st time last weekend and this was exactly my process:

I torch it for 40 seconds through the hole on the side. This will create a flame that will burn. Leave it alone in the wind and come back in 3 minutes to blow on the pellets to get the small flame going again. Repeat this step once more. After torching, blowing until small flame twice, and then waiting 3 more minutes, put it in the smoker. I use an MES30 Gen 1 so I had the flame side of the AMNPS facing towards the back of the unit with the chip tray pulled out a couple inches and the chip loader pulled out a couple inches. 1 row burned for 3 hrs. It was beautiful..
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Clicky