Advice on best way to go with this barrel

Discussion in 'UDS Builds' started by scholl, Aug 24, 2016.

  1. scholl

    scholl Newbie

    I have a UDS and had to burn and scrape and sand etc. to get the liner out. WOW 

    I have a barrel and to make another. The inside does not look the same as the one before.Take a look at the lid and tell me the best way to get this copper colored coating off. I scratched it so you can see the bare metal. It's won't wipe off. Thanks
     
  2. Hello.  Welcome.  I see this is your first post.  Please take some time and swing over to Roll Call and introduce yourself so that we may give you a proper "Hello".  All info you can provide us with such as smoker type, location and so on will help us answer any questions you may have, and pictures help a bunch.  As for your question: you have the answer.  "I have a UDS and had to burn and scrape and sand etc. to get the liner out. WOW".  Have fun.  Good luck.  [​IMG]

    Glad to have you with us.  Keep Smokin!

    Danny
     
  3. scholl

    scholl Newbie

    OK Danny, Thanks. I updated my profile and added a sig. I 've been a member since 15 and today was first post.

    I think it's some kind of rust inhibitor inside the barrel. My first UDS had a liner and I worked to hard to remove it. I was hoping for an easier way.
     
  4. scholl

    scholl Newbie

    I discovered it's rust inhibitor. I will still have to get rid if it. I am going to wire brush and machine sand the paint outside and inhibitor inside. I burned the first out and worked harder getting the black mess off. Thanks for the help.
     

Share This Page