Adding to our arsenal

Discussion in 'Meat Thermometers' started by tailgate72, Oct 31, 2011.

  1. tailgate72

    tailgate72 Smoke Blower

    Our order came in tonight from Todd..Once again its was OUTSTANDING service.

    But here is what came in this time.

    Thought I would show pics this time as OldSchool razzed me last time about it LOL..I had enough forthought to take a couple before we just started ripping into boxes like it was christmas morning.


    Good Pic of my haul this time from Amazen Products. I was really on the fence about dust or pellets. Talked to Todd about it for about 20 mins. In the end hooked me up with a really good price on it.


    All our Mavericks set up and getting ready for the boil test


    Boil test complete 1 & 4 ran 210   2 & 3 had to be difficult and run 210 on the food  208 on the bbq least we know now and can compensate.

    Thanks again Todd your the man.

  2. adiochiro3

    adiochiro3 Master of the Pit OTBS Member

  3. smokinal

    smokinal Smoking Guru Staff Member Moderator OTBS Member ★ Lifetime Premier ★

    Looks like your all set!
  4. tjohnson

    tjohnson Smoking Guru Staff Member Moderator Insider OTBS Member SMF Premier Member


    They look cool all lined up!

  5. garyinmd

    garyinmd Meat Mopper SMF Premier Member

    Nice haul Dave.  One thing to watch if you are using multiple ET732's is keep an eye on the temps, at least when you start.  I have two sets and when I was checking my offset to see what the temp difference was across the grate I thought it was funny that both were reading exactly the same, thought damn I did a good job on the mods.  Finally dawned on me the receivers were both reading the same base unit.  I shut off one set, waited a bit and then restarted and they were then different.

    This is how I had the probes arranged, also had a third set I had for awhile.


    Hard to see but they are both reading the same.


    Real temps after I shut off the unit on the left and restarted.


    Just a FYI

  6. oldschoolbbq

    oldschoolbbq Smoking Guru OTBS Member

    There ya go Dave, now yor're set, got mine too[​IMG].

    Have fun and.......
  7. tailgate72

    tailgate72 Smoke Blower

    Thanks gary, Yea I thought of that when I did the boil test. All ours seemed ok, only one temp at a time but something to definetly watch in the future.

    Thx again for everything Todd

    Thx OldSchool
  8. bigfish98

    bigfish98 Smoking Fanatic

    Nice! I am ordering my first AMNPS tonight! I will have to post some pics when I get mine too!

  9. oldschoolbbq

    oldschoolbbq Smoking Guru OTBS Member

    You're welcome , Tailgate. You got me bested though,you got 4 AND an AMNPS[​IMG]  . 

    Squeezing that 732 out was hard enough, I'll have to continue to coldsmoking the old way,[​IMG].

    Darn disability, my allowance dropped drastically when that came about , oh well [​IMG]  ...
  10. donr

    donr Smoking Fanatic

    Does anyone make a single unit that will read multiple probes?
  11. Something like this donr?


Share This Page