Abt Holder

Discussion in 'Fruit, Nuts & Vegetables' started by smokin for life, Aug 3, 2007.

  1. smokin for life

    smokin for life Smoking Fanatic OTBS Member

    Here's a ABT holder I made out of a piece of aluminum about 7/8 thick 5"x12" The legs are piece's of the strips for hold up a dropped ceiling. The holes are 7/8". I mess up one row of holes so it'll only hold 24.
    [​IMG]
     
  2. blackhawk19

    blackhawk19 Master of the Pit OTBS Member

    Are you right on the thickness, it looks thinner in the pic, great idea though
     
  3. smokin for life

    smokin for life Smoking Fanatic OTBS Member

    Yepper I'm right about the thickness 1/8" thick.
     
  4. blackhawk19

    blackhawk19 Master of the Pit OTBS Member

    I only questioned because your original post said 7/8" thick, I agree with the 1/8" and will make one, thanks for the idea
     
  5. keywesmoke

    keywesmoke Smoking Fanatic OTBS Member

    On another forum somebody suggested poking holes in an upside down tin foil disposable muffin/cupcake pan. Great idea. D'oh!
     
  6. t-bone tim

    t-bone tim Master of the Pit OTBS Member

    That's a great little rack Smokin,thanks for sharing !![​IMG]
     
  7. deejaydebi

    deejaydebi Smoking Guru

    BJ's has these little stainless racks full of holes tonight about 18" x 14" for $4.90. I bought one. I'm going to expand about 25 of the holes for ABTs and leave the rest just for smoke. I think it'll be a great meatloaf or mushroom pan too.


    inches Opps!
     
  8. gypsyseagod

    gypsyseagod Master of the Pit OTBS Member

    18 ft ??? should i get another pit & weld the 3 together ???? lol
     
  9. chris_harper

    chris_harper Master of the Pit OTBS Member

    here is pics of my rack i made at work. i took a piece of 1/8" thick steel plate, and made it 12" x 8". i punched 1" holes in it. it holds 35 peppers.
    [​IMG]
    [​IMG]
     
  10. jminion

    jminion Meat Mopper OTBS Member

    A few years ago I had some left over expanded metal I cut to size picked up 4 stainless bolt and 8 each stainless bolt and washers. Used the bolts for legs locking them inplace with nuts and washers, the rack is still going strong.
    Jim
     
  11. msmith

    msmith Master of the Pit OTBS Member

    Very good ideas looks like I will have to go make me one now.
     

Share This Page