500 gallon smoker build

Discussion in 'Reverse Flow' started by lngliv3, Jun 13, 2014.

  1. oldschoolbbq

    oldschoolbbq Smoking Guru OTBS Member

    OMG [​IMG], you must eat a lot of"que" or going into business ...  That' will take a 'Rick' of wood to heat up...[​IMG]

    I'm watching this...[​IMG]...
     
  2. lngliv3

    lngliv3 Meat Mopper

    Well I dropped the fire box to under the rf plate and welded the thing on . I will have to weld a plate over the bottom portition because of my misjudgment in my figuring .
     
  3. lngliv3

    lngliv3 Meat Mopper

     
  4. lngliv3

    lngliv3 Meat Mopper

     
  5. lngliv3

    lngliv3 Meat Mopper

     
  6. lngliv3

    lngliv3 Meat Mopper

     
  7. lngliv3

    lngliv3 Meat Mopper

     
  8. lngliv3

    lngliv3 Meat Mopper

    I need a bigger trailer
     
    Last edited: Sep 11, 2014
  9. daveomak

    daveomak Smoking Guru OTBS Member SMF Premier Member


    That opening between the FB and CC doesn't look like 311 square inches... You might check it out and make any changes now.....
     
  10. lngliv3

    lngliv3 Meat Mopper

    Dave that's the front of my fire box my plate was a few inches short so I have to add a bit to it but I'm thinking of installing a sliding gate/door for air intake and to clean the ashes out
     
  11. daveomak

    daveomak Smoking Guru OTBS Member SMF Premier Member

    Gotcha .......
     
  12. rob sicc

    rob sicc Smoking Fanatic Group Lead

    I'm sorry I can't offer help but I look forward to watching the progress of your build.  It looks like it's going to be neat.  Good luck.
     
  13. lngliv3

    lngliv3 Meat Mopper

    Cut the material last night for my hinges just have to grind them and dress them up. I'm thinking of drilling holes in them to dress them up a bit.
     
  14. lngliv3

    lngliv3 Meat Mopper

     
  15. lngliv3

    lngliv3 Meat Mopper

     
  16. lngliv3

    lngliv3 Meat Mopper

    Ok yall I'm tring to figure out my stack or stacks per the figures I need 102" of 5". 51" at two stacks of 5" any other ideas
     
  17. daveomak

    daveomak Smoking Guru OTBS Member SMF Premier Member



    Use the calculator to figure out a 30-35" stack....
     
  18. lngliv3

    lngliv3 Meat Mopper

    Please elaborate on that Dave
     
  19. lngliv3

    lngliv3 Meat Mopper

    Please elaborate on this Dave
     
  20. An 8" stack would only need to be 39"

    Gary
     

Share This Page