4th try to post Hi

Discussion in 'Roll Call' started by handymanherb, Nov 28, 2010.

  1. handymanherb

    handymanherb Newbie

    I'm HandymanHerb in Orlando, I quit there becuase I been dumped 2 times, it locked up on spell check the first time, so I give up trying
     
  2. eman

    eman Smoking Guru Staff Member Moderator OTBS Member

    Hiya Herb,

     Welcome to smf!

    I think some days the computer just has to make sure that we know who's the boss.
     
  3. richoso1

    richoso1 Smoking Guru OTBS Member SMF Premier Member

    Welcome to the SMF, and congrats on winning the tug of war. When you have a chance, give us a little introduction about yourself and your choice of smoking/grilling equipment. It's all good my friend.
     
  4. rdknb

    rdknb Master of the Pit OTBS Member SMF Premier Member

    Welcome to SMF you will like it here good info good people
     
  5. tom37

    tom37 Master of the Pit OTBS Member SMF Premier Member

    Welcome to the site handymanherb.

    The site still has a hitch or two in its gettie up, but for me 99.9% of the time things are good. I have come to really like this format and wish some of the others I view had some of these features.

    Hope you enjoy.
     
  6. handymanherb

    handymanherb Newbie

    Let me try it again, Hi I'm Herb, and I want to be a smoker, my younger brother has smoked a few times, he used one of his friend's smoker last July to make us a great brisket at family reunion, and everyone is ready to dump the same old chicken we order every year and go for some more good smoked meat.

    So we want to make our own as we can't find what we want, we not fooling around and are going to build a trailer mount, we are still in the design mode, but we are thinking right now we want to build it vertical 6 ft high x 7ft long x 35 inches wide, we leave the top foot for warming/holding.

    Also thinking right now we want the fire box in the bottom, so we could use the full length for even heat and if we want, we can make it hot were we want it to be.

    We would include baffles so the heat wouldn't go straight to the meat and having the water troth one the end of one of the baffles to carry the steam up with the smoke and heat.

    We got a great mig welder, we need to get a plasma cutter to cut the pieces clean and stright as possible, also I was thinking about building it double walled, to hold heat better.

    But we will wait to see what you guys think, we know we may not get it perfect the first time and may have to tune on it, but want it to be close.
     
  7. scarbelly

    scarbelly Smoking Guru OTBS Member

    Welcome Herb - glad to have you here and there is a lot of great info on building your own smoker if you do a search you will find all you need
     
  8. meateater

    meateater Smoking Guru SMF Premier Member

    Welcome to the SMF. Glad to have you here. Lots of good folks, great recipes and knowledge. Looking forward to your first qview. [​IMG]
     
  9. handymanherb

    handymanherb Newbie

    Might be a while before we get started, my brother have been doing the maintenance for a 31 chain stores for years and going to take over the janitorial work too, just a carpet machine goes from 2000 to 7000 dollars easy, so spare money may be tight for a while.

    It should give us more time later to build what we want, we have till June to get it built,  we hope we can get all the stores up in great shape in 2 months so we will have more time for projects.

    But when we get started I'll be sure to post pictures
     
    Last edited: Dec 2, 2010
  10. fpnmf

    fpnmf Smoking Guru OTBS Member

    Fl
    Welcome Herb. This is a great place.
     
  11. handymanherb

    handymanherb Newbie

    One of the guys on pontoonforums.com asked for advice on a smoker to buy for Christmas, I and one more member there and here too, told him to check here first, that a few other guys are smoking already, will join in too, I told them just the pictures of the food with make you hungry for some good smoked food. 
     
  12. bmudd14474

    bmudd14474 Guest

    Welcome to SMF Herb. Check out the 5 day ecourse. Lots of great information in there. As for the trailer smoker you want to build that sounds massive. Check out the build section and you will find lots of great ones done by members here.
     
  13. realtorterry

    realtorterry Master of the Pit OTBS Member SMF Premier Member

    Welcome friend
     
  14. mossymo

    mossymo Master of the Pit OTBS Member SMF Premier Member

    Welcome to SMF HandymanHerb, glad you joined us!

    My suggestion would be an inexpensive build of a UDS (ugly drum smoker) or purchase an inexpensive smoker to suffice while you research other peoples builds - http://www.smokingmeatforums.com/forum/list/197

    Doing this will maintain your interest in smoking (what you make will drive you towards smoking more and more) and hands experience's will give you accurate idea of what you really want to build.

    Looking forward to reading more of your posts and hearing what you end up deciding on!
     
    Last edited: Dec 2, 2010
  15. mballi3011

    mballi3011 Smoking Guru OTBS Member SMF Premier Member

    [​IMG]

    First off Welcome Herb to SMF. You'll like it here for there are alot of really good folks here that would just love to help you with just about anything to do with smoking. Now there are alot of proven recipes for some amazing things here too. So if you need sign up for the E-Course it's free and it will give you the basics of smoking and some good methods to use also. So the next big thing for you to do is go out and get you something to smoke and if you happen to have any questions just post it here and we will be happy to answer them for you.

    Welcome To Your New Addiction  
     
  16. handymanherb

    handymanherb Newbie

    I have the 5 day and read through it a few times, well up to the point I get hungry and have to quit     [​IMG]    
     
    Last edited: Dec 3, 2010

Share This Page