2 Sirloin Tips, 2 End Temps

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

cael

Smoke Blower
Original poster
Jun 18, 2015
111
17
Edmonton, Alberta, Canada
Hi there.

I am going to make 2 sirloin tip roasts in my Mes 30 w/RF, cooking at about 225.    I'd like one to get to a finished internal temp of about 135-140, and the other to about 160 (Dad can't abide pink and its his b-day so he wins).     Both roast are about 3 pounds and sizes and shapes are very even and similar.  I was guessing they would be in for about 3-4 hours.

So with those specs (3 pounds X 2 roasts, 225 degrees, even size, 20 degree spread) can you recommend how much earlier to put one roast on so that I would get close?

Thanks.

Oh, and if because they are so small if anyone has any other suggestions please feel free.   Perhaps they would benefit from a different temp to compensate for size?

I'm making these for Canada Day (July 1) so I've got awhile to get all my info.      And I'm definitely a newbie, so no advice will be wasted.   
icon_biggrin.gif
 
 
This is just a guess, maybe an hour longer than the other one. A three pound roast is only going to take 1 1/2 - 2 hours to get to 135-140. Both will need to rest a good 30-45 minutes wrapped in foil after you cook them.
 
I have been cooking a lot of beef lately including sirloin tips and i found the best tool for cooking beef is a probe thermometer. basically you want to cook it to about 8-10 degrees less than you want and then wrap (i use foil) a couple times and let rest an hour to an hour and half and then slice. I like medium so i go around 138-142 and let rest to about 150ish. if you like medium rare try about 126 degrees and let rest and if you like med well cook until about 150 IT. time varies on a lot of factors like size of meat and type of smoker. i would let a good probe thermometer be your guide.

also i wouldn't go really complex on the rub its beef it tastes good by itself SPOG (salt peper onion garlic) or something like Montreal seasoning (available most places) is as crazy as i get with rubs with beef. maybe soak in Worcestershire sauce for a salt component.

as far as wood i like harder woods (hickory is good) for beef but they do burn hotter.

Happy Smoking!

phatbac
 
Thanks for the replies, guys.

I will try putting one on an hour early to go for the range.

And a big yes to the probes.   Have 2 in addition to the built in wireless one.    Temp is all important!    And hickory sounds like a fine choice.   :)
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky