Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. butchms

    Pecan Shells for Smoking???

    Thanks for all the replys. I am going to try some sjells on chickrn this week end. I hope the results turn out well. IH it does I will have an endless supply to smoke with.
  2. butchms

    Pecan Shells for Smoking???

    Has anyone ever used pecan shells for smoking? I can have all I want from a local sheller. Just trying to find out if they might work in a smoke box of an electric smoker. Comserned that they might produce a bitter taste like bark.
  3. butchms

    NEW REVERSE FLOW SMOKER

    The cooking chamber is 48 in long. It was rolled out of a new piece if 1/4 plate..
  4. butchms

    NEW REVERSE FLOW SMOKER

    Thanks for looking. Talk with me, we both might come away happy.
  5. butchms

    NEW REVERSE FLOW SMOKER

    No ississippi Tank did not build it. It was built by a life long friend of nine. He is 81 years old and is in his shop by 7:00am  everyTue-Sat. He is a true craftsman.
  6. butchms

    NEW REVERSE FLOW SMOKER

    Thanks for looking. Until the last week or so it has not been warm enough here to get a good cure on the paint. I am wheelchair bound and will try and find someone to help me do it.in the next few days.
  7. butchms

    NEW REVERSE FLOW SMOKER

    I had this smoker built this past winter. Being handicap ed , with a leg amputation, .  Realize now that this is going to be too much smoker for me. The smoker is built out of 1/4 steel plate and has never had a fire in it, This smoker was built to last a lifetime and is a top quality build. I...
  8. pugcowboy.gif

    pugcowboy.gif

    • butchms
    • Media item
    • Comments: 0
    • Album: Default
  9. butchms

    First RF build and I need some tech help.

    I am ssorry I didn't put in my firebox size. I have a piece of 14D x24L 5/16 pipe that i was going to use. It would be close in area to the 22 inch if I had it 22 x 16L= 7.65 sqft 14 x 24=  7.32 sqft I hope I am right regarding sqft mass producing the same result. The entire cooking chamber...
  10. butchms

    REVERSE FLOW BUILD, FIRST TIME TO BUILD HELP!!!!!

    Hey guys I want to thank each of you for your feedback.
  11. butchms

    First RF build and I need some tech help.

    I an new to the site and have a case of Smokin Feaver. I have low vision and use a screen reader on the computer. It will not read the format of the Reverse Flow Calculator . Can someone help me to find the answers to these questions? 1- the cooking chamber size is 22D x 48W . What size round...
  12. butchms

    Reverse Flow Smoker Plans

    Hey Duys     I want to thank Moparman for his feedback regarding OSPHO. I did call the company and spoke with their tech service. I was just repeating was told to me. I would never try to put anyone in danger.Especially myself or family. I had used the product externally and it did a super...
  13. butchms

    Reverse Flow Smoker Plans

    I had the same question about it being used in a cooking unit. The tech perso, at the mfg company, n at the said it should not be a problem.
  14. butchms

    Reverse Flow Smoker Plans

    The OSPHO I told you about is brushed on. The surface is ready to paint when ot dries. It is really a good product to stop and arrest rust.I have seen it used on the Gulf Coast alot.
  15. butchms

    Reverse Flow Smoker Plans

    They have a web site www.ospho.com You can get it at Ace Hardware if you have one in your area.
  16. butchms

    Reverse Flow Smoker Plans

    I am starting a pipe build also. The pipe I got carrie a lot of rust also. You might want to check out a product call OSPHO. It has been used here on the Gulf for years. It works great.
  17. butchms

    REVERSE FLOW BUILD, FIRST TIME TO BUILD HELP!!!!!

    I am using a piece of 20in 3/8 wall pipe for the cooking chamber, It It will be 36in long. The firebox will be made of 14i 3/8 n x 24 pipe. I understand that the channel plate should mount 3-4in under the cooking grate. It will have a drain to allow the drippings to exit the cooking chamber. It...
  18. Default

    Default

    • butchms
    • Album
    • Comments: 0
Top Bottom
Back
Clicky