Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. uisge beatha

    How I bypassed the controller in my MES and added Aubirn PID

    I personally chose to bypass it, but I think it's a great point you bring up.  We do rarely/never hear about complaints of that part failing and it's certainly easy enough to leave it in line.  Just wire from the AC cord, to the thermal switch and then to the element (as is the original...
  2. uisge beatha

    How I bypassed the controller in my MES and added Aubirn PID

    http://www.auberins.com/index.php?main_page=product_info&cPath=14_28&products_id=380
  3. How I bypassed the controller in my MES and added Aubirn PID

    How I bypassed the controller in my MES and added Aubirn PID

  4. uisge beatha

    How I bypassed the controller in my MES and added Aubirn PID

    I know there is already a thread about how to bypass the MES controller and add an Auburn PID but I did it a little differently so I thought I would share.  Also, I had revived that other thread and asked a question but never got an answer so I thought it better to start a new thread, with a...
  5. P Clamps.JPG

    P Clamps.JPG

    • uisge beatha
    • Media item
    • Comments: 0
    • Album: How I bypassed the controller in my MES and added Aubirn PID
  6. Transformer bypassed.JPG

    Transformer bypassed.JPG

    • uisge beatha
    • Media item
    • Comments: 0
    • Album: How I bypassed the controller in my MES and added Aubirn PID
  7. Running Auto Tune.JPG

    Running Auto Tune.JPG

    • uisge beatha
    • Media item
    • Comments: 0
    • Album: How I bypassed the controller in my MES and added Aubirn PID
  8. Simulated Load.JPG

    Simulated Load.JPG

    • uisge beatha
    • Media item
    • Comments: 0
    • Album: How I bypassed the controller in my MES and added Aubirn PID
  9. Broken door latch.JPG

    Broken door latch.JPG

    • uisge beatha
    • Media item
    • Comments: 0
    • Album: How I bypassed the controller in my MES and added Aubirn PID
  10. Notched Back Panel.JPG

    Notched Back Panel.JPG

    • uisge beatha
    • Media item
    • Comments: 0
    • Album: How I bypassed the controller in my MES and added Aubirn PID
  11. New Top View.JPG

    New Top View.JPG

    • uisge beatha
    • Media item
    • Comments: 0
    • Album: How I bypassed the controller in my MES and added Aubirn PID
  12. New Back View.JPG

    New Back View.JPG

    • uisge beatha
    • Media item
    • Comments: 0
    • Album: How I bypassed the controller in my MES and added Aubirn PID
  13. Taped insulation .JPG

    Taped insulation .JPG

    • uisge beatha
    • Media item
    • Comments: 0
    • Album: How I bypassed the controller in my MES and added Aubirn PID
  14. Notched Insulation 1.JPG

    Notched Insulation 1.JPG

    • uisge beatha
    • Media item
    • Comments: 0
    • Album: How I bypassed the controller in my MES and added Aubirn PID
  15. Spray insulation.JPG

    Spray insulation.JPG

    • uisge beatha
    • Media item
    • Comments: 0
    • Album: How I bypassed the controller in my MES and added Aubirn PID
  16. Added Insulation.JPG

    Added Insulation.JPG

    • uisge beatha
    • Media item
    • Comments: 0
    • Album: How I bypassed the controller in my MES and added Aubirn PID
  17. RTV Terminal Box.JPG

    RTV Terminal Box.JPG

    • uisge beatha
    • Media item
    • Comments: 0
    • Album: How I bypassed the controller in my MES and added Aubirn PID
  18. RTV holes.JPG

    RTV holes.JPG

    • uisge beatha
    • Media item
    • Comments: 0
    • Album: How I bypassed the controller in my MES and added Aubirn PID
  19. RTV terminals.JPG

    RTV terminals.JPG

    • uisge beatha
    • Media item
    • Comments: 0
    • Album: How I bypassed the controller in my MES and added Aubirn PID
  20. Heating Element Pulled Through.JPG

    Heating Element Pulled Through.JPG

    • uisge beatha
    • Media item
    • Comments: 0
    • Album: How I bypassed the controller in my MES and added Aubirn PID
Top Bottom
Back
Clicky